Inman, South Carolina

864-510-3288

Gbyers@infratechsvs.com

InfraTech Services Inc.

InfraTech Services Inc., is owned by Gary and Karyn Byers 

with 25+ years of Providing Regenerative Solutions for Challenging Environments.  We specialize in Coatings, Restorations and Reinforcements for Civil and Industrial  Concrete and Steel Infrastructure.


InfraTech Services Inc. is  available for hire as a Consultant, Inspector, Project Manager, and/or Certified Technician. 


InfraTech Services Inc. specializes in single and plural component pump rebuilds and Pump Training  Classes for your crew at your facility.  


InfraTech Services Inc. is now offering Specialty Coating and Prep Equipment for Sale and Rental. We can provide a trained technician to go with any rental equipment you may need.

These slides show some of the different types of  projects we've undertaken.

 

About InfraTech Services, Inc.

Restoration and Coating Solutions for Challenging Environments! 

Gary and Karyn Byers successfully managed AmeriCoatings Inc. out of WA State for 15 years until being bought out and starting a new coating company, InfraTech Services Inc.. Gary and Karyn Byers have consulted on, managed, inspected, trained crews and supervised numerous projects in a huge variety of environments, including  underwater  pipe and structural repair. They have been a part of a variety of challenging restoration and coating projects all over the US and even traveling to Aruba, Bahamas and Trinidad, before settling in South Carolina. Both are NACE 2 certified coating inspectors.  InfraTech Services Inc. has successfully completed many commercial and industrial projects in South Carolina and surrounding areas since its inception in 2015, using much of the specialized and industrialized equipment now for sale or rent to complete the varies projects below.

  • Abrams- Kiewit – Coating Pipelines and Vaults in El Paso, TX
  • All Metals - Dock refinishing in Spartanburg, SC
  • AZR (American Zinc Recycling) – Prepping and Coating Tanks, Containments, Flanges, Pump Bases and Decks in Mooresboro, NC
  • BHI Energy – Coating Gearboxes in Piedmont, SC
  • Brand Energy Solutions - Coating vertical wall surfaces in Pasadena, TX
  • Carolina Recycling – Blasting and Coating Tank in Belmont, NC
  • Clearwater Paper – Coating Chestwall and floors in Shelby, NC
  • Control Solutions – Repairing warehouse floor in Pasadena, TX
  • CR Meyer – Coating walls and floor in Macon, GA
  • DeNora Water Technologies – Curb repairs, Driveway apron repairs and Concrete Restoration in facility in Houston, TX
  • ETM INC. – Graphic Packaging floor coating in Santa Clara, CA
  • First Baptist Church – Prep., Profile, Diamond Grind and Epoxy floor coating in Spartanburg, SC
  • Glyn C Babb Paint Contractor – Warehouse floor; Needlegun, Shotblast, Diamond grind, and Epoxy coating in Summers, SC
  • Horsehead Metal Products – Tank: Crack repair, Pressure wash, Inspection, Epoxy Injection, Acid resistant Liner, and Secondary Containment floor coating in Mooresboro, NC
  • Integrity Grading and Construction – Injected Plural Component Waterstop, Coat Catch basins, Coat Secondary Containment in Mooresboro, NC
  • Inteplast Group – Warehouse floor Concrete Restoration due to failed pour-backs and trench in Lolita, TX
  • PL Developments – Double Broadcast Floor Coating in Clinton, SC
  • Renfrow Industrial – Coating Duct work in Spartanburg, SC
  • SCCC – Floor Coating at Machine Tool Lab in Spartanburg, SC
  • Secondary Solutions – Clean Room Epoxy Floor in Spartanburg, SC
  • Stebbins Engineering – Media 15K Hydroblast Rebar in Mooresboro, NC
  • Valmet Inc. – Removal of coating in Dryer Drums, Prep, Profile and Recoat. Media Blast Fans and Housings and repair Hoods in Gray Court SC and Bethune, SC
  • Wolverine Coatings – Hydrobalst 3 steel Tanks and Showroom Floor Coatings in Spartanburg, SC
  • York School District – Flake Epoxy floor in bathrooms, epoxy wall coatings, Demo of cement Mortar and install of Epoxy Mortar in York, SC
  • Zefco Industrial Flooring – Diamond Grind floor in Williamston, SC
0

Projects Completed
In South Carolina

0

For Sale
or Rent

0

Crews
Trained

0

Years
Experience

Our Services

RESTORATION AND COATING SOLUTIONS in CHALLENGING ENVIRONMENTS for
Pipes, Vessels, Tanks, Containments, bridges, dams, canals and much much more ..... 

Equipment for Sale / ReNT

We are now offering  Specialty Prep and Coating Equipment for sale  or rental.  For financing follow the READ MORE link in our equipment listed  descriptions, or click on the shopping cart, in the header . You will then be connected to view our equipment on Equipment Trader.  We have so many pieces of equipment and smaller tools available that we can't feature them all here. To find items not listed here click this Downloadable List.  If you don't see what you need, please contact us, we might have that Specialty Piece of Prep or Coating Equipment that you are looking for. We  can provide a trained technician to familiarize you with any equipment you purchase or rent.   


Consulting AVAILABLE

Gary and Karyn Byers demonstrate knowledge of industrial coatings and coating applications, with  many years of experience in the application of specialty coatings and variety of prep/profile challenges.  They have a proven record of successfully managing/leading crews in complex construction and/or contracting environments including plant shutdowns. Each of them has strong oral and written  communication, leadership and interpersonal skills with the ability to interface with key client personnel keeping a positive customer service mindset.  Gary and Karyn  are available  for  Project Development,  and as Consultants or Project Managers. 


Pump training  classes 

InfraTech Services specializes  in  pump safety and operation training and troubleshooting for plural component adhesive and coating delivery systems for your crew at your facility, as well as on the job supervision.  When delivering ratio sensitive materials is critical to your success, contact InfraTech Services. Whether you are using epoxy, polyurethane vinylester, polyester, polyurethane, polyurea, polyaspartic or other specialized materials, InfraTech Services can provide expert training on system configuration and operation.  Also available for your pump rebuild needs on a variety of  Spray systems, Epoxy Injection Pumps, and other polymer delivery systems.


Trained Technician

InfraTech Services Inc. is now offering Trained Technicians to run and/or supervise the  use of  the  Specialty Coating and Prep Equipment we have, or provide a technician for equipment you may have on site and need help with . Our technicians are trained in Interior and Exterior equipment  such as: Water Blasting, Pressure Washing, Media Blasting, Cleaning, Profiling, Coatings, Toppings, Membranes, Crack repairs, Grouts, Composites and Injections, Diamond Grinding, Concrete Polishing,  and much more ...

SAFETY EQUIPMENT 

Contact InfraTech Services Inc.  via message, text or email for a list of all our Safety Equipment. We have repelling safety and tie-off gear for bridge and wall coatings!  We also have supplied air respirators and blast  hoods both high and low pressure . Plus a lot more Safety and Testing Equipment available for sale or rental, along with Certified Level 2 Coating Inspectors for Quality Assurance reports. Confined space certified personnel also available for your "Hole Watch" needs.

Coating Inspector 

Gary and Karyn Byers  are both NACE  Level 2 certified coating inspectors and can  help  you to maintain  project specifications and manufacturers recommendations on all coating projects.  They can maintain accurate daily QA/QC records to support documentation of all coating activities and ensure compliance with  the project specifications.  They also provide Off-site support of coatings work plan development in concert with manufacturers specifications and prevailing standards. 

Training

Gary Byers has vast knowledge of all different kinds of single and plural component spray and injection pumps. He is a NACE Coating Inspector Level 2- Cert. No. 51051. Gary has successfully held numerous training sessions at facilitates all over the USA along with training local crews for different epoxy applications and pump use in Aruba, Bahamas and Trinidad. He is consistently contacted for his expertise in problem solving pump issues and environmental job site challenges.  Besides offering upbeat, comfortable, hands on training he offers job site supervision and pump rebuilds.  

2 and 3 day Trainings completed:

  • CEB Construction - Pump Training for PPC and confined spaces in Miami, FL
  • Chesapeake Systems/ GoodTower Service Division – Pump Training for AST HRMP 075 in Hanover, MD
  • DW Miller Construction Inc.- Pump Training for Meter Mix Dispense System with 2 Gear Metering Pumps in Courtland, Virginia
  • JB James Constriction – Pump Training for 624 Brute Epoxy Joint Pump in Baton Rouge, LA
  • L King Co.  - Pump Training for Joint Sealant Pump BCV DE-55 EHD SCMP-8932 Smart Pump in Baton Rouge Airport
  • MarshBell Construction – Pump training for AST pump in Williamston SC
  • RC Construction – Pump Training for RPM Mini Brute Epoxy pump in Greenwood, MS
  • Ribeiro Construction – Pump Training in Clinton, MD
  • SAP Contracting Corp. – Pump Training and ratio testing in FallsChurch, VA
  • Summers Concrete – Pump Training for AST RPM 624 Brute Epoxy pump in Hahira, GA
 
 

Instruction

Training and Support for Pump Instruction 

require a ½ down deposit 1 week before scheduled training and Costs Include:


  • Travel miles @ $1.70 per mile if driving InfraTech Services truck
  • Airfare @ current price for round trip if not driving  
  • Car Rental @ current price in area if flying in
  • Labor for Travel Day @ $560.00 per travel day        
  • Day 1 – Pump Training as requested @ $1,650.00 per day  
  • Day 2 – Hands on Pump operation and troubleshooting issues @ $1,650.00 per day
  • Most training is sufficiently handled in 2 days, but we offer an optional 3rd day @ $1,650.00 for Field support on your job site or additional trouble shooting as needed
  • Hotel stays for number of nights lodging @ current price in area
  • Meals are Per diem for number of days traveling and training @ $80.00 per day  
  • NOTE: Any days onsite after original 3 days will be charged at only $1,000 per day plus per diem and lodging.              

Machinery for Sale or rent

Solutions for Industries

2018 BALDOR AQUA MISER BOSS E25V

High Pressure Water Blast Pump The Aqua Miser® model E25V is a state of the art 25 HP electric motor driven water blast system with a triplex plunger pump capable of delivering pressures to 15,000 psi at 3.2 gpm. Equipped with a variable speed drive, the operator can set the desired blast pressure via a color graphics touch screen operator interface. The drive will adjust pump rpm as pressure is automatically maintained by compensating for tip wear. Machine controls and diagnostics can be accessed from this interface – making operation and troubleshooting a snap!This system is not only a water-only unit, it includes the BOSS abrasive injection system for results that water alone cannot achieve.  READ MORE

 

CAN-DO! BullDozer

CAN-DO! Dozer Work by former NAVY SEABEE Equipment Operator :

Case 850 Long Track BullDozer and Owner/Operator available for; land clearing, stump removal, grading, site work, brush clearing, culverts, fence-line clearing, leveling, driveway construction, gravel delivery and spreading, structural demolition, and rough-in landscaping .... 


We will work by the hour or provide a lump sum bid for your project. Please just give me a call and we'll discuss it. By the hour or by lump sum bid. Hourly rate for; Dozer and Operator $100 per hr. (Minimum charge $1,000.00 plus delivery and pickup charges.) Delivery and pickup rate for the dozer will be charged according to the distance hauled.

(delivery rates are reasonable.) Call Gary 864-398-9468 This BullDozer is NOT for sale.

 

2018 PIRATE BULK ABRASIVE BLAST MACHINE

SPH BULK BLASTING POT & MOUNTS - 120-160 CU FT / 160 CU FT BULK POT / SPH (PRESSURE HOLD) ELECTRIC CONTROLS / 888-0034-10812PB  SPH, BULK ABRASIVE BLAST MACHINE (SANDBLAST POT), 160 CU. FT. (4531 LITERS), 12 VDC ELECTRIC CONTROLS, (4) OUTLETS, INCLUDES: APV METERING VALVES W/URETHANE SLEEVES, 150 PSI (10.3 BAR) POWDER COATED PRESSURE VESSEL, INLET MANIFOLD, 1-1/2" GALVANIZED PIPING, POWER CORD, 110' CONTROL CORD & CONTROL HANDLE FOR EACH OUTLET.  PREMIUM STANDARD FEATURES: 1/2" THICK HEAVY WALL PRESSURE VESSEL RATED FOR 150 PSI FOR HIGHER PRODUCTION - HYDRO TESTED TO 225 PSI - ASME & CRN FOR ALL PROVINCES - FULLY SEAL WELDED - POWDER COATED. CURVED ERGONOMIC LADDERS WITH TWISTED RUNGS & GRAB BARS. SAFETY VALVE FOR CHECKING IF VESSEL IS PRESSURIZED. RACK PORTS - BULK BAG RACK READY.  READ MORE

 

2017 OTHER Blastrac 2-20DT / Global Shotblaster w/ Dust Collector, 

ASM/BLASTRAC-2-20DTMKII GLOBAL460V, 60HZ, 3PH, w/50' of 6" hose - 400V, 3 PHASE, 60HZ,w/DUST BIN. The Blastrac® 2-20DTMKII is a powerful self-propelled 20” shot blasting system, ideal for medium to larger sized jobs. Whether improving traction & skid resistance or prepping for coatings and overlays, the versatile 2-20DTMKII strips, cleans & profiles concrete & asphalt, or horizontal steel surfaces in one easy step. The BDC-99, a nine cartridge auto pulse dust collector, is preferred by contractors requiring continuous operation and high performance. Designed for high productivity, easy dust handling and ease of maintenance. READ MORE

 

2013 CUMMINS ONAN 40 KW

2013 CUMMINS ONAN 40 KW, 40 kw 3 phase Cummins-Onan generator.

Trailer mounted with 200 gallon fuel cell Low Low hours, only 221 hrs. New tires all around. Single and three phase. Has a  power distribution panel.

This unit is also available for rent with delivery available. Sale Price is negotiable please call 864-398-9468.

READ MORE

 

2013 FLOWMARK C/955K Diesel Husky S255

Husky S-255 with External Compensation (Trailer not included) The Husky is the industry standard for portable ultrahigh-pressure waterjet surface preparation, cleaning and cutting applications. It is a direct drive triplex plunger pump with full pressure compensation capable of delivering 55,000 psi and flow rates up to 6.5 gpm. Features: Single point pressure adjustment, 290-hp Model C9 engine that is Tier 3 certified to meet emission standards worldwide, Water booster & filtration system to ensure quality and constant water pressure; purifies water of particulate matter to 10 micron, Triple high-pressure outlet ports, 90-gallon modular fuel tank, Detachable operator box to allow removal of operator panel, operator can monitor and control pump remotely. READ MORE

 

2013 ATLAS COPCO XAS 400 CD7

This PORTABLE XAS 400 CD7 has only 315 hrs of use. It a silenced, single-stage, oil injected screw compressor, has a nominal effective working pressure of 100 psi (7 bar). It is driven by 4 cylinder in-line liquid-cooled diesel engine. The engine’s power is transmitted to the compressor element through a heavy-duty coupling.The compressor casing houses two screw-type rotors, mounted on ball & roller bearings. The compressor delivers pulsation-free air. Injected oil is used for sealing, cooling and lubricating purposes. The oil is boosted by air pressure.  The vessel is provided with an oil level indicator. READ MORE

 

2008 Whisper Watt Generator

Whisperwatt Super-Silent Model DCA-220SSJ 176 kW generator a high quality portable (mounted on a trailer for transport) power source for industrial & construction machinery. It is equipped with the state of the art Open-Delta excitation system. There are four connections of the open delta A, B, C and D. During steady state loads, the power from the voltage regulator is supplied from the parallel connections of A to B, A to D, and C to D. If a heavy load, or short circuit occurs, the automatic voltage regulator switches configuration of the open delta to the series connection of B to C. READ MORE

 

2006 ATLAS COPCO XAS -1600 CD CFM Air Compressor

2006 ATLAS COPCO XAS - 1600 CFM TRAILER MOUNTED "MEGA" AIR COMPRESSOR - NEW 2013 TIER 3 MEGA CAT C15, 440 HP TURBO DIESEL AFTERCOOLED,  PRODUCES 1600 CFM AT 100 PSI OR 1400 CFM AT 150 PSI - 440 HP CAT MOTOR WAS REPLACED WITH NEW MOTOR (2013)  and ENTIRE UNIT HAS ONLY 6,400 HOURS with ONLY 1,150 HOURS SINCE THE NEW POWERPLANT WAS INSTALLED, 140 GALLON FUEL TANK, WATER COOLED.    This unit is also available for rent. Sale Price is negotiable please call 864-398-9468. READ MORE

 

The Graco XP70 Plural-Component Sprayer

This sprayer was used for one project and then flushed for storage by a Graco service technician. The unit is in like-new condition. It also has the remote mixing manifold as well as spare fluid lowers availabel for different ratio coatings. You wont find a cleaner used plural component pump to buy.  READ MORE

 

Tennant 6400 Cleaning Machine 

TENNANT 6400 PROPANE LP FLOOR RIDER SWEEPER This Industrial sweeper is perfect for commercial applications with its compact size for indoor or outdoor use and comes with front and rear lights. The Top end has been rebuilt and necessary parts replaced. This unit was serviced by a certified mechanic and serviced according to factory specifications. This Tennant Sweeper 6400 has an air cooled Kohler engine and other features include: Efficiently sweeping multiple debris types and containing dust in one pass with a 50 Inch sweeping path. Effectively lowers maintenance and repair costs with long-lasting, robust quality and no-tool brush changes. Increases productivity with intuitive controls, multi-level dump hopper with spring-loaded, front-access door. Other key reliability and performance features include; Perma-Filter™ which slows down dusty airflow and prevents heavier dust and moisture from reaching the panel filter. Polyethylene hopper and shrouds withstand harsh debris without corrosion. Multi-level, auto dump lets operators empty debris into containers up to 5 ft / 1.5 m high. Retractable side brush absorbs impact, protecting the machine and your property in congested areas. This floor sweeper is for sale at the incredible price of $12,000.00 and is also available to rent. READ MORE

 

2008 HeatStar HS 4000 

2008 Enerco HeatStar HS 4000 IDG Indirect Fired Heater,
This HeatStar Heavy Duty Portable Indirect Fired Forced Air Heater HS4000IDG provides indirect, temporary heat to various industrial / commercial workplaces. This liquid propane / natural gas heater features flame / overheat safety shut-off for added security, a durable powder coated finish and is rugged, convenient and ready to use. The F151092 has heavy duty 10" pneumatic tires / wheels for fast and easily portability. Automatic safety / control devices, long-life stainless-steel combustion chamber. It is rugged, convenient and ready to use for; Temporary Heat for Construction Sites, Workshops, Industrial / Commercial Workspaces, Emergencies, Large / Military Tents, Large Capacity Warehouses, Greenhouses, Remodeling Jobs, Shops, Mines, Government, Animal Comfort or Crop Drying. READ MORE

 

We’re very pleased with the spray rig InfraTech designed for us. It has worked wonderfully since our initial purchase and continues to pay dividends! The detailed training they provided our crews was crucial to our success with the rig and has resulted in our ability to provide a very high quality product that otherwise wouldn’t have been possible.


Kevin Hetman, Manager Chesapeake Systems,
LLC GoodTower Service Division  


Gary, I just wanted to tell you that the floor looks absolutely amazing. Your team was extremely well trained and very polite with the other trades working on the site. Thank you for all your help in the decision making process, as far as the finish, luster etc. I like working with a turn key contractor that needs no guidance after an agreed upon scope of work. I would not hesitate to contact you and use you again on any of the restoration projects that I manage. Thank you again. BE SAFE 


BRUCE POWELL -
Sr. Health and Safety Compliance Officer Project Manager
Paul Davis National

We have worked with InfraTech on several occasions. The work performed has been excellent and they have been very accommodating. Most of the work performed had to be done on weekends and/or holidays, when the equipment within the machine was shut down. I would recommend to others. Karyn and Gary have always been very responsive. 


Michael Kelley
Project Manager
Tissue Mills Business Unit Valmet, Inc.

Dear Gary, Spartanburg Community College would like to take this opportunity to thank InfraTech Services Inc. and your staff for a job well done on the P. Dan Hull Machine Tool Flooring Project. …… You were able to complete the project within the deadline required and quality did not sacrifice...... SCC would recommend InfraTech Services Inc. for other work of this nature......a committed partner and team that gives the utmost attention to detail we've ever experienced with any flooring contractor on flooring systems of this type. Sincerely


David W. Barber-
Spartanburg Community College Campus Operation

‘I utilized InfraTech on several projects with AZR and was very pleased with the quality, workmanship, and results provided. Gary and Karyn bring a high level of expertise and knowledge and a willingness to evaluate various options to determine the ideal solution. I felt like they were always trying to provide the best long term solution and value for my company. ‘ 


Jason Balmer - P.E. American Zinc Recycling



Frequently Asked Questions

Solutions for Industries

Financing is available through the Equipment Trader website - just follow the link "READ MORE " under the item you are interested in or click the Shopping Cart ICON in the top right corner of our website. It will take you directly to the Equipment Trader website and you can apply for financing there.

A Technician /Experienced Professional to supervise and /or run rental equipment is available at an additional cost per hour. Cost determined by specific piece of equipment rented and length of rental.

Delivery cost is determined by equipment weight, size and miles to your location. If equipment needs to be shipped to you, you will incur the shipping charges and they must be paid in advance.

One Day Rental = One (1) 8-hour shift over a 24 hour period for a total of 8 hrs per day for daily rental. One Week Rental = Five (5) 8-hour shifts over a 7 day period for a total of 40 hrs per week for weekly rental. One Month Rental = Twenty (20) 8-hour shifts over a 28 day period for a total of 160 hrs per month for monthly rental. We can also arrange UNLIMITED Rental Periods for certain items. Call for more details.

Contact us

PROVIDING YOU WITH SOLUTIONS
FOR DIFFICULT PROJECTS 

Gary and Karyn Byers, owners of InfraTech Services Inc. have successfully been providing Restoration and Coating Solutions for Challenging Environments even before moving from Washington State to South Carolina.

Both Gary and Karyn are NACE certified Level 2 Coating Inspectors. You can reach either of them by leaving a message here or by calling the office phone and leaving a voice mail, calling directly to their cell or emailing them. If you have a difficult, challenging project, InfraTech Services Inc. is just a phone call away and ready to help you develop the best solution and come up with a do-able strategy to implement it.


* InfraTech Office Phone: 864-510-3288
* Gary Byers Cell: 864-398-9468
* Gary Byers Email: Gbyers@Infratechsvs.com 
* Karyn Byers Cell: 360-798-6246
* Karyn Byers Email: Kbyers@Infratechsvs.com

Looking for quality and affordable Services for your next project?